Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://mx.ogasa.org.ua/handle/123456789/8256
Назва: Расчет неоднородных анизотропных прямоугольных пластин с произвольным закреплением на контуре
Автори: Заврак, Н.В.
Ключові слова: анизотропные пластины
метод конечных разностей
напряженно-деформирование состояние
Дата публікації: 2019
Видавництво: Актуальні проблеми інженерної механіки, VI, 2019
Серія/номер: ;с.111-114
Короткий огляд (реферат): The developing of the effective methodic of elastic orthotropic plates’ calculation and the research on the base of their state under different boundary conditions are of great importance nowadays. The representation of the received results in the form, convenient for practical use, is also important. For practical applications in engineering are important tables for determining deflections and internal forces of structures. Such tables for the isotropic case under various conditions of plate support on the contour are given in many works. As for the anisotropic plates, there are no such tables, with the exception of one Huber table compiled for a freely supported rectangular orthotropic plate, depending on the relationship between the stiffness values s = D11D22 / D12 = 1. Here is a method of calculating the non-homogeneous anisotropic rectangular plates with arbitrary fixation on the contour is set forth, which is reduced to a boundary value problem. The main idea of a calculated general methodic of linear marginal differential tasks calculation is based on underlying of the main part of a solution. Such approach is proved by means of development and some generalization of common positions of a variational method of marginal tasks of mathematical physics of self-conjugated tasks solution. To solve a system of equations in terms of displacements using finite difference method (FDM) in combination with different variations of analytical solutions. It is advisable to construct a numerical solution of the problem so that in difficult cases the support fixing and uploading solution sought, not directly, but in the form of amendments to the known solution for simple cases of reference to consolidate and uploading at finding the solutions which the analytical methods or the FDM with sparse mesh may be used. Given as examples are the results of calculation for a series of square orthotropic plates with a fixed boundary under the action of uniformly distributed load.
URI (Уніфікований ідентифікатор ресурсу): http://mx.ogasa.org.ua/handle/123456789/8256
Розташовується у зібраннях:Актуальні проблеми інженерної механіки VI, 2019



Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.